| |
|
|
Abacus a) Abacus stand
Plastic base 120/150 X 28/30 X 15/18mm with as per dowel dia punch fitted in holes. 8mm/ 10mm deep 5 holes. Marking as per sample. As per sample
b) Aluminium Dowels
Dia 6 X 100/102mm. Write 100, 10, 1, 1/10, 1/100 in while colour on box As per sample
c) Beads of one bright colour
"Diameter 12.5mm X 10mm height and throughout hole dia
6.5/7mm As per sample"
Send Enquiry
|
|
|
|
|
|
A pack of cards
numbered from 1
to 100
Plastic coated on both sides As per sample
Send Enquiry
|
|
|
|
|
|
Board showing
numbers+104 to- 104
A4 sizex2,Plastic coated on both sides
As per sample
Send Enquiry
|
|
|
|
|
|
Dice 1 to 6
Blue and Red Cube 18/20 mm.
side,edges rounded As per sample
Send Enquiry
|
|
|
|
|
|
|
|
|
Kit Box with carton 6 ply
Main Body of 24 SWG and doors and partitions of 26 SWG M.S.Sheet. Doors will be fitted 15 mm above the ground level with main body. Right hand door should have two racks with 2 size of holes to accommodate 42 containers/vails. The rack partition should have guides (As per sample) for free movement. Rack size 220mm x 100mm x 15mm. M.S.Sheet 24SWG. 1st rack should have 18 holes dia 26 mm and 2nd rack to have 29 holes (dia. 15 mm 20 holes. And dia 26mm 9 holes) Inside painted Light Grey. Main body and doors may be of different matching colours. The doors should have suitable piano hinges duly spot welded/riveted etc. with main body. Provision for locking system (As per sample) & two folding type handle 4mm dia for carrying box. Provision for supporting rest for hanging doors to be made. Allover box size 530 x 305 x 460mm. As per sample.
Send Enquiry
|
|
|
|
|
|
Panel for Connections
Wooden box / plastic ABS 170 mm x 140 mm, Taper 50 mm back and 20 mm front side, painted white, markings in black.
DC Voltmeter : 0 - 20 V with resolutions of 0.4 V, 0 – 1 Amp. with resolutions of 20 mA.
Rectifier : Four diode rectifier bridge circuit (Full wave rectification of AC).
Panel connections : For input / output etc. As per sample.
Send Enquiry
|
|
|
|
|
|
|
|
|
Perspex Plano Convex Cylindrical Lense
Dia. 25 mm , half of the diameter x 15 mm height.
Send Enquiry
|
|
|
|
|
|
Cover Slips
0.5 mm thick, 18 mm square glass pieces.
Send Enquiry
|
|
|
|
|
|
Electric bell
Plastic base 190 x 120 x 15 mm, attached with steel bell cover of dia 77 mm, two brackets attached to MS strip for striker to bell along with rectangular coil having 26 SWG super enameled copper wire of 600 turns (225 gm wire) and iron core to fit in the coil. As per sample.
Send Enquiry
|
|
|
|
|
|
Plastic Strip (Type I)
Transparent Perspex 262 x 20 x 2.7 mm to 3 mm, having 3 holes of dia 5 mm at a distance of 50 mm, 120 mm and 190 mm from one end. 4 slots 125 x 5 mm with both ends rounded to semi-circle. Location of slots: 1st slot : 0-25 mm, 2nd slot : 70-95 mm 3rd slot: 140-165 mm, 4th slot: 210-235 mm As per sample
Send Enquiry
|
|
|
|
|
|
Plastic Strip (Type II)
Transparent plastic 262 x 20 x 2.7mm to 3 mm, having 2 holes of dia 5 mm at a distance of 50 mm and 120 mm from one end. 3 slots 125 x 5 mm with both ends rounded to semi-circle. Location of slots: 1st slot : 0-25 mm 2nd slot : 70-95 mm 3rd slot : 140-235 mm As per sample
Send Enquiry
|
|
|
|
|
|
Half Protractor
Transparent plastic dia 90 mm, thickness 2 mm. Double angle marking 0-1800 With center hole dia 4mm. on base line. As per sample
Send Enquiry
|
|
|
|
|
|
Full Protractor
Transparent plastic dia 120 mm, thickness 2 mm. Double angle marking 0-3600 With center hole dia 4mm. on center point. As per sample
Send Enquiry
|
|
|
|
6262/26/2, Idgah Road, Ambala Cantt 133001
+91 - 171 - 2641604, 4007890
